KiloVault PLC 2100

KiloVault® PLC 2100 Advanced Pure Lead Carbon Battery

KiloVault® PLC 2100 is a cost-effective, maintenance- free battery that offers superior performance in Partial State Of Charge (PSoC) applications, combining pure lead and advanced carbon technology for extended battery life and rapid charging.

Features

  • Maintenance Free
  • Exceptional PSoC Performance
  • Advanced Pure Lead Carbon Technology
  • Cycling / Backup / Self Consumption
  • Super-Fast Charging
  • Maximized Cycle Life

 

Where to Buy

KiloVault PLC 2100 Product Details

Description

Maintenance Free
Worry free operation at remote off-grid locations. No water to check means convenience and peace of mind. These batteries don’t need to be babysat. 2 year shelf life with a low self-discharge rate.

Exceptional PSoC Performance
Off-grid and backup applications aren’t always able to fully recharge batteries completely, leaving them in a partial state of charge. The PLC 2100 is designed specifically for PSoC operations.

Advanced Pure Lead Carbon Technology
PLC high power, energy-dense batteries have a specially formulated carbon additive that enhances the overall battery life. These are not your normal lead acid batteries.

Cycling/Backup/Self Consumption
The PLC 2100 is ideal in cycling and backup power applications. Self-consumption applications allow energy stored to be used when solar production is less than the loads, or during peak times instead of sending back to the grid.

Super-Fast Charging
Don’t waste precious time. High charge rates allow the PLC 2100 to reach 90% state of charge in less than an hour!

Maximized Cycle Life
Affordable high performance with 3000 Cycles @ 50% depth of discharge. Pay less up front and get lower overall cost per kWh cycle over the life of the battery.

Documents

Click to view or download the following product information and user manuals:

KiloVault PLC 2100 Data Sheet

KiloVault PLC 2100 Installation and User Manual

KiloVault PLC 2100 Limited Warranty

KiloVault PLC 2100 and Schneider SW Integration Guide

KiloVault PLC 2100 and Schneider XW Pro Integration Guide

 

PLC 2100
Electrical Specifications
Rated Voltage
12V
Nominal Amp-Hour Capacity
(C20 Hr Discharge)
180Ah
Rated Capacity
2160Wh
Float Charging Voltage
13.7V
Bulk/Absorption Voltage
14.1V – 14.4V
Max Discharge Current
500A (5s)
Max Charge Current
140A (100A recommended)
Max Configuration
Up to 4 parallel strings of 4 series batteries (16 total batteries)
Self Discharge
Batteries can be stored up to 24 months at 25°C (77°F). For higher temps, the time interval will be shorter. Battery should be given a top off charge when the open circuit voltage approaches 12.6V, or when the max storage time is reached, whichever occurs first.
Cycle Count
3000 Cycles @ 50% Depth of Discharge
Warranty
5 year limited warranty
Environmental Specifications
Nominal Operating Temperature Range
77°F ±5°F (25°C ±3°C)
Operating Temperature Range
(Internal to Battery)
Discharge -40°F - 131°F (-40°C - 55°C)
Charge -4°F - 113°F (-20°C - 45°C)
Storage -4°F - 122°F (-20°C - 50°C)
Terminal
Top terminal M8 insert, front terminal M6 adapter
Terminal Hardware Torque
71 in-lbs (8Nm) ±5%
Battery Interconnects/Terminal Covers
Included
Physical Specifications
Weight
127 lb (57.6 kg)
Height
12.6 in (320 mm)
Width
4.92 in (125 mm)
Depth
22 in (559 mm)